Updates and revision information are shown below.

The latest version of Net LineDancer is 16.00 20170615.1447

16.00 20170615.1447

* Added ability to see current active users in the Users page of the Server Settings dialog.
* Added support for NEC QX series devices using the H3C Switch adapter.
* Added support for Dell Networking OS 10 devices using Dell PowerConnect adapter.
* Added support for Cisco IOS XR 6 devices
* Updated Allied Telesis FS900M adapter to no longer require SNMP for backup
* Updated Alaxala adapter to no longer require FTP or SNMP for backup.
* Updated Furukawa adapter to no longer require SNMP for backup.
* Updated CheckPoint adapter to not include log files in backup.
* Fixed superfluous startup vs running diffs on Century NXR devices.
* Fixed error when running Arista backups without an enable password configured.
* Fixed issue where the number of items shown in the Job History view was incorrect.
* Fixed error running Command Runner against Cisco ASA devices with "" in the "show version" output.
* Fixed backup failures on certain PaloAlto devices.
* Fixed issue where terminal proxy connections couldn't be made against the Default network.
* Fixed issue where realtime backup wouldn't run because the SEC process occasionally wouldn't start.
* Fixed hardware collection on Juniper JunOS 16 devices.
* Fixed model and serial number collection for Huawei devices.
* Fixed hostname parsing on certain Allied Telesis devices.
* Fixed backup failures on Allied Telesis XSeries devices caused by an unknown more prompt syntax.
* Fixed backup failures for Arista EOS when no enable password is specified.
* Fixed issue running Command Runner against IOS XR devices.
* Fixed issue where the backup fails if the IOS device does not have a startup-config.
* Fixed issue where an error was shown when closing a terminal proxy connection.

16.00 20170519.1232

* Added new adapter for Century Systems WXR (NXR).
* Added system settings for configuring the CORS Access-Control-Allow-Origin behavior.
* Added support for disabling and enabling the systemd service unit (CentOS/RedHat 7).
* Fixed issue running password change on Cisco IOS when the username is configured with a 'secret'.
* Fixed backup failures for AlliedTelesis CentreCOM devices.
* Fixed neighbor data collection for FortiNet devices with VDOMs.
* Fixed issue that caused systemd service status to show as 'failed' when the service was stopped (CentOS/RedHat 7).
* Fixed issue that caused realtime backups to not run within 5 minutes of a previous backup.
* Fixed issue with terminal proxy SSH server terminal negotiation that prevented tab completion when using newer SSH clients.
* Fixed OS version collection for Juniper JunOS 13.3 and later.
* Improved backup failure handling for Alaxala devices.
* Improved Cisco IOS-XR backup to retain the running-config OS version information header.
* Fixed issue for Fortigate devices where the serial and model number wasn't displayed caused by HA setting.

16.00 20170412.1450

* Updated AlliedTelesis adapter so that backups don't make any changes to the configuration.
* Updated to not start the SNMP Trap client UDP port until it is needed.
* Fixed backup failures for AlliedTelesis CentreCOM devices when the response from the device is slow.
* Fixed performance issue that caused very large (300MB+) configuration files to not be saved and backups to hang.
* Fixed issue where old Terminal Proxy logs weren't displayed after updating.
* Fixed backup failure for H3C/HP Comware devices when there is a more prompt.
* Fixed support for realtime backup for some H3C/HP Comware devices.
* Fixed issues running change tools on Fortigate devices.
* Fixed issue with HP Procurve backup that caused superfluous data to be included in the configuration.
* Fixed backup failures for Allied Telesis FS900M Series devices.
* Fixed issue where RedHat/CentOS 6.8 is detected as 5.x causing the server to bind on an incorrect port.
* Fixed issue with excel import when the import contained the same IP address in two different networks.
* Fixed issue where Daily System Backup couldn't be disabled.
* Fixed backup failure when configured credentials contains an invalid IP address.
* Fixed error running configuration change report when configuration line endings have changed.
* Fixed issue with HP ProCurve backup when the enable username does not exist.

16.00 20170316.1431

* Fixed a SmartBridge port bind issue on RHEL/CentOS 5 that prevented the bridge from starting.
* Added support for Allied Telesis x200 switches.
* Improved Linux adapter for terminal proxy to not require modifying the LANG setting to login.
* Fixed ability to import and export SmartChanges.
* Fixed backup failures for Cisco IOS devices with responses longer than 60 seconds.
* Fixed backup failures for Apresia devices when no password is required.
* Fixed backup failures when the syslog server is disabled.
* Fixed backup failures for Allied Telesis CentreCOM devices.
* Fixed issue on Alteon devices where new backups weren't collected even if there was a change.
* Fixed issue for Cisco Nexus devices where the model number wasn't displayed.
* Fixed serial number and hardware collection for Dell PowerConnect switches.
* Fixed issue where some Juniper switches were identified as Dell.
* Fixes performance issue retrieving job history for a large number of job histories.
* Fixed issue where the weekly database cleanup job could potentially run for days due to an inefficient database query.
* Fixed issue where the job type for reports from before v13.08 would be incorrectly identified in the job history.
* Fixed error when creating a managed network from a redundant slave server.
* Fixed jumphost port not setting to default port.

14.06 rev.20170314.1407

* Fixed issue where the weekly database cleanup job could potentially run for days due to an inefficient database query.
* Fixed backup failures for Cisco IOS devices with responses longer than 60 seconds.

16.00 rev.20170125.1012

* Fixed issue where charts weren't shown in emailed reports on certain email clients.
* Fixed backup failures on certain Fortigate devices.
* Fixed spurious diffs caused by private keys on Fortigate devices.
* Fixed error when search for terminal logs on systems with more than 1024 managed networks.
* Fixed sporadic backup failures for Cisco Nexus devices.
* Fixed tool type selection in tool job creation dialog.
* Fixed spurious diffs on Alteon devices.
* Fixed backup failures for newer models of Alteon devices.
* Fixed error opening terminal proxy against Alteon devices.

16.00 rev.20161214.1447

* Moved server log files into "log" directory.
* Added support for password change when using ActiveDirectory as an external authentication configuration.
* Added ability to export the list of configured users as an Excel spreadsheet.
* Added support for using wildcard addresses to discover devices.
* Added support for backing up Cisco ASA firewalls with FTP.
* Improved error handling for SmartChange import
* Fixed failure running discovery job when IPv6 is disabled.
* Fixed issue where configuration change report would contain extra whitespace when viewed from certain email clients.
* Fixed the order of commands used for restoring configurations to Fujitsu SRS devices.
* Fixed backup failures for Riverbed Steelhead with SCP transfers longer than 30 seconds.
* Fixed command runner failures when multi-byte characters are used in commands.
* Fixed backup failures for certain HP ProCurve switches when configured with AAA.
* Fixed issue opening terminal proxy sessions from Internet Explorer.
* Fixed issue that prevented the service from starting after an unclean shutdown.

16.00 rev.20161012.1559

* Added support for Dell DNOS 9 to the Dell PowerConnect adapter.
* Added the ability to copy and paste a list of devices from a compliance policy to a job.
* Fixed backup failures for some Cisco ASA devices running with multiple contexts.
* Fixed backup failures for Cisco Wireless LAN Controllers with more than 15 configured users.
* Fixed error opening terminal proxy against Aruba devices.
* Fixed OS version number sorting for Fujitsu, Cisco ASA, and F5 BigIP devices.
* Fixed backup failures for FortiGate devices when pre-login-banner or post-login-banner is configured.
* Fixed out of memory error while backing up some F5 BigIP devices on Windows.
* Upgrade to 64bit perl for windows installations.

14.06 rev.20161012.1512

* Fixed error opening terminal proxy against Aruba devices.
* Fixed OS version number sorting for Fujitsu devices.
* Fixed backup failures for FortiGate devices when pre-login-banner or post-login-banner is configured.

16.00 rev.20160915.1621

* Added support backup up Cisco ASA firewalls using the backup command.
* Fixed memory usage issues for long running backup jobs.
* Fixed backup failures on certain Cisco Nexus devices caused by an unexpected control character.
* Fixed backup failures on Arista devices caused by an unexpected control character in the login.
* Fixed backup failures for PaloAlto devices

14.06 rev.20160909.1243

* Fixed erroneous newline differences in Juniper ScreenOS configurations.
* Fixed issue causing chassis to not be shown in hardware reports for Cisco ASA firewalls.
* Fixed backup failures for PaloAlto devices
* Fixed backup failures for certain Cisco ASA firewalls with multiple contexts.
* Fixed issue where adapter logs were sometimes written to an incorrect log file.

16 rev.20160901.1013

* Cross-Network Management
* Device File Attachment
* Users now have the ability to attach files to devices in the inventory.
* Authentication Audit Logging
* Smart Bridge Reverse Connection
* Backup over Jumphost
* Configuration Change View
* Hostnames in Job Output
* Selectable Columns for Inventory Export
* Automatic SNMP version selection
* Improved Serial Number Search
* Web Proxy Support
* Regular Expressions in Compliance Rules
* Hostnames in Job Output
* Report Spreadsheets (Compliance, Backup, and Managed Network Usage reports)
* IP in PnP Request History
* Juniper JunOS "set" Configuration

14.06 rev.20160823.0924

* Fixed backup failures for PaloAlto running PAN-OS 7.
* Fixed backup failures for HP PowerConnect devices that are configured with AAA.
* Fixed issue capturing context configurations on Cisco ASA firewalls.
* Fixed issue that caused Terminal Proxy to hang while connecting to certain devices over SSH.
* Fixed OS version number parsing for Cisco CatOS devices.

14.06 rev.20160721.1434

* Added support for Multiple Context Mode on Cisco ASA firewalls.
* Added support for backing up Cisco Wireless Controllers without TFTP.
* Improved hardware parsing for Cisco 6500 switches with VSS.
* Fixed issue causing telnet backups against slow devices to capture incorrect configurations.
* Fixed Aruba Command Runner to use carriage return instead of line feed when sending commands.
* Fixed backup failures for certain Arista devices.
* Fixed issue with PaloAlto adapter that caused an empty configuration to be saved.
* Fixed H3C/HP Comware adapter to properly fail when configured user has insufficient privileges.
* Fixed backup failures for Apresia when show version output contained the word "fail".
* Fixed issue that only allowed importing one fewer device than the license node count.

14.06 rev.20160623.1451

* Improved syslog event server performance for better throughput.
* Fixed timing issue that caused compliance rules to sporadically not be evaluated.
* Fixed Cisco PnP failures caused by incorrect parsing of the "correlator" in the XML request.
* Fixed PaloAlto adapter to support backing up HA configurations.
* Fixed PaloAlto adapter to properly report TFTP transfer failures so that protocol retry works.
* Fixed backup failures for Cisco ASA device that are configured for auto-enable mode in AAA.
* Fixed backup failures for F5 BigIP devices that contain control characters in the prompt.
* Fixed failure when sending HTML reports as emails.

14.06 rev.20160517.1532

* Improved interface parsing for HP/H3C Comware switches.
* Fixed serial number parsing for Aruba switches.
* Fixed configuration restore for Aruba switches.
* Fixed incorrect device type value for Brocade NetIron CES switches.
* Fixed interface enablement tool for Brocade NetIron CES switches.
* Fixed issue where the PnP Type could only be changed by a user with the Administrator role.

14.06 rev.20160421.1350

* Added support for changing the port the client uses when connecting to terminal proxy.
* Improved error handling for Cisco Nexus backups when the user doesn't have appropriate authorization.
* Fixed incorrect device type value for Juniper SRX.
* Fixed terminal proxy integration for locales other than en_US or ja_JP.
* Fixed backup failures for Cisco ASA devices that contain control characters in "show inventory" output.
* Fixed issue where command runner output was not displayed for Riverbed Steelhead devices.

14.06 rev.20160408.1300

* Added support for Apresia switches running AEOS version 6.
* Fixed error when running the compliance violation report with a large number of violations.
* Fixed PnP configuration import failures for excel files with numeric columns.
* Fixed occasional backup failures for Blue Coat Proxy SG devices with unexpected control characters.
* Fixed credential retry logic for Blue Coat Proxy SG devices when enable password isn't specified.
* Fixed issue with sporadic, erroneous diffs when backing up Cisco Nexus devices.
* Fixed authentication against ActiveDirectory servers in Forest configuration.

14.06 rev.20160309.1659

* Fixed version number parsing for Cisco IOS Denali 16.x software.
* Fixed backup failures for certain BlueCoat ProxySG devices.
* Fixed issue where some terminal logs would remain active indefinitely.
* Fixed issue where PnP export wouldn't work for more that 16 devices.
* Fixed password reset tool for new stricter password hashing.
* Fixed permission issue with managing external authentication.
* Fixed terminal proxy support for HP ProCurve switches running in Menu mode.
* Fixed issue with sporadic, erroneous diffs when backing up Cisco SCE devices.
* Fixed backup failures for certain Cisco ASA firewalls running in multi-context mode.
* Fixed issue where configuration template compliance rules wouldn't cause violations

14.06 rev.20160210.1109

* Updated reporting to not send emails when the report is empty.
* Updated discovery to not attempt discovery of *.0 or *.255 IP addresses.
* Fixed issue that prevented more than 512 static credentials to be used.
* Fixed error when sending HTML reports as emails.
* Fixed permission error when editing custom device field names.
* Fixed permission error when editing security roles.
* Fixed backup failures for menu based HP ProCurve switches.
* Fixed spurious diffs on some Furukawa FX routers.
* Fixed spurious diffs on Juniper JunOS devices when the configuration contains mixed line endings.
* Fixed occasional backup failures for Cisco CatOS switches with console logging enabled.

14.06 rev.20160115.1626

* Added support for F5 BigIP devices configured with bash login shell.
* Added hardware details for secondary device in FortiNet FortiGate HA pair.
* Updated syslog tool to not disable syslog entirely on Juniper ScreenOS firewalls.
* Improved backup performance of Alcatel-Lucent TiMOS devices with very large configurations.
* Fixed backup failures for Fujitsu SRS devices with large numbers of static routes.
* Fixed backup failures for Cisco ASR devices that contain invalid data in "show inventory".
* Fixed issue where backups didn't properly fail for invalid credentials on Brocade FabricOS devices.

14.06 rev.20151218.1414

* Use more secure password hashing algorithm for local users.
* Fixed service script for CentOS 7.2.
* Fixed hardware collection for certain BigIP devices.
* Fixed backup failures when using SNMPv3 with AES encryption.
* Fixed backup failures for certain Allied Telesis CentreCOM devices.
* Fixed backup failures when "show interface" on Cisco IOS takes longer than 5 minutes.
* Fixed backup failures with the Linux adapter running against VMWare.
* Fixed issue running password changes against Big-IP using SmartChange.
* Fixed model number parsing for Cisco SG300-28MP switches.
* Fixed permission error when opening devices without permission to view draft configurations.

14.06 rev.20151207.1446

* Added "Cisco SCE - Limited" adapter.
* Added retry logic for Cisco IOS backups when nvram is busy.
* Improved hardware parsing for Cisco Nexus MDS devices.
* Improved hardware parsing for Cisco ASA firewalls.
* Fixed Terminal Proxy SSH server RSA key persistence.
* Fixed issue where Cisco IOS backup would hang if configurations had multiple crypto certificates.
* Fixed backup failures for Big-IP devices with lots of routes defined.
* Fixed issue preventing configuration memos from being saved.

14.06 rev.20151120.1204

* Added support for FortiMail Email Security Appliances.
* Increased maximum number of incoming FTP connections.
* Improved hardware parsing for Cisco Nexus MDS devices.
* Fixed issue with activating licenses that contained multibyte characters.
* Fixed backup failures when credentials contained a double-quote (").
* Fixed privilege escalation vulnerabilities.
* Fixed data truncation error after backing up Cisco Switches with voice modules.
* Fixed backup failures for certain HP ProCurve devices.
* Fixed issue where terminal proxy would hang if the credentials for a device were modified.
* Fixed spurious IOS OS distribution failures when configurations contain "#" characters.
* Fixed Telnet-only backup failures for Alcatel-Lucent SR OS devices with very large configurations.

14.06 rev.20151007.1420

* Added support for sending SNMP traps when a job fails.
* Added support to deep link directly to each page of the devices detail view.
* Added support for Cisco Service Control Engine.
* Added support for backing up Cisco ASAs that require the "login" command.
* Fixed privilege escalation vulnerabilities.
* Disabled various insecure SSL ciphers.
* Fixed issue backing up Cisco Nexus devices with locked configurations.
* Fixed backup failures for certain HP/H3C Comware version 7 switches.
* Improved discovery adapter matching for Fortigate.
* Improved scheduling of usage report.
* Fixed error when importing device from spreadsheet that contains duplicate devices.
* Fixed backup failures for Cisco IOS devices with #s in the banner.
* Fixed device type identification for Juniper QFX switches.
* Improved hardware and VLAN parsing for Alaxala devices.
* Fixed error when running compliance policy report.

14.06 rev.20150907.1102

* Added support for adding custom login page branding.
* Fixed backup failures for certain HP ProCurve switches.
* Fixed issue preventing compliance rule sets from being edited when policies were enabled.
* Fixed issue where compliance policy device counts were sometimes wrong.
* Fixed issue where neighbor collection failed for certain Cisco Nexus devices.
* Fixed issue that sometimes prevented the UI from loading on IE11.
* Fixed security vulnerability that allowed access to any managed network through the API.
* Fixed superfluous scrollbars in HTML configuration viewer.

14.06 rev.20150824.1454

* Added new Compliance Policy Report.
* Added new Managed Network Usage Report.
* Fixed software version parsing on certain Cisco ASR devices.
* Fixed issue where user specified timeout was ignored in SmartChange.
* Fixed issue logging into Allied Telesis 8724SL devices when a hostname is configured.
* Added support for backing up FortiGate devices with read-only access.
* Added additional diagnostic information for testing external authentication configuration.

14.06 rev.20150730.1533

* Add support for Arista switches.
* Added new Compliance Violation Report.
* Fixed issue backing up certain F5 BigIP devices.
* Improved PnP configuration import to support any column order.
* Improved support for CheckPoint firewalls.
* Fixed issues with terminal control characters in tool output for Fujitsu SRS devices.
* Fixed issue where superfluous changes were shown for Alaxala configurations.
* Fixed terminal proxy login when using Tera-Term 4.87.
* Fixed backup failures for certain Cisco Firewall Switch Modules.
* Added support for backing up Yamaha devices that use RADIUS authentication.
* Added support for neighbor data collection on Cisco Nexus devices.
* Fixed issue where job histories weren't deleted when a network was deleted.
* Fixed issue where credential weren't deleted when a credential configuration was deleted.
* Fixed issue where Fujitsu draft configurations would contain extra newlines.
* Added support for connecting to the terminal proxy from a Cisco SSH client.
* Fixed backup failure for certain virtual Juniper JunOS devices.
* Fixed issue executing password change tool against Riverbed Steelhead devices.

14.06 rev.20150528.1842

* Add feature to track the last backup duration for devices.
* Add backup and terminal proxy support for RedHat Linux servers.
* Added a permission to disallow editing the admin user settings.
* Added support for RADIUS authentication.
* Add support for new CheckPoint firewalls.
* Fixed backup performance issues with F5 BigIP devices.
* Improved hardware parsing for Alcatel-Lucent TiMOS devices.
* Improved hardware parsing for Brocade NetworkOS devices.
* Improved support for Cisco Small Business switches.
* Improved hardware parsing for APC SmartUPS device.
* Improved parsing for BlueCoat ProxySG.
* Fixed backup failures for HP ProCurve switches that don't support TFTP.
* Fixed backup failures for certain Alteon devices.
* Fixed backup failures for certain PaloAlto devices.
* Fixed issue where Riverbed Steelhead backups wouldn't fail properly.
* Fixed backup failures for new Extreme Networks XOS switches.
* Fixed issue running FTP backups on Smart Bridges.

 

14.06 rev.20150318.1915

* Added support for Furukawa devices.
* Added support for Cisco Small Business Switches.
* Added support for APC SmartUPS power supplies.
* Added support for AlcatelLucent SR OS devices.
* Added support for configuration restore for Fujitsu SRS devices.
* Added the ability to remember discovery boundary networks.
* Added support for collecting Neighbor Data for Brocade FastIron devices.
* Fixed an issue when running IOS OS Push operations against large number
 of devices.
* Fixed a memory issue when backup F5 BigIP devices.
* Fixed an issue with intermittent SSH backup failures.

14.06 rev.20150213.1803

* Added support for MikroTik RouterOS devices.
* Added support for Pica8 devices
* Added support for ApresiaLight switches.
* Added discovery support for additional Cisco Wireless Controller models.
* Fixed issue where the last page of HP terminal logs could be empty.
* Fixed issue backing up Alaxala switches over SSH when running
 on Windows.
* Improved storage efficiency of F5 BigIP backup.ucs history.

14.06 rev.20150115.1134

* Prevent hashed passwords on Aruba devices from causing superfluous
 differences.
* Fixed issue getting the hostname for H3C/HP Comware switches.
* Fixed hardware collection for stacked H3C/HP Comware switches.
* Fixed issue backing up certain Cisco Catalyst switches.

14.06 rev.20141222.1732

* Added support for Fujitsu CFX devices.

14.06 rev.20141219.1708

* Added support for Brocade Network OS switches.
* Added support for Riverbed Steelhead WAN Accelerators.
* Added support for Fujitsu IPCOM devices.
* Fixed issue where syslog wasn't initiating realtime backup.

14.06 rev.20141202.1746

* Fixed issue where TFTP server would shut down for some bad requests.

14.06 rev.20141125.1641

* Improved support for Cisco IOSXR devices.

14.06 rev.20141117.1221

* Added support for new AlcatelLucent switches.
* Added support for new H3C/HP Comware switches.

14.06 rev.20141029.1408

* Fixed SSL 3.0 vulnerability (CVE20143566).
* Fixed an issue when opening large terminal logs.
* Fixed an issue when opening a terminal form the rightclick menu on Chrome.
* Authentication Server (Active Directory) integration.
* Redundancy feature that is available to Linux only. Require a PostgreSQL database.
* Search by IPaddress in the static credential.
* Improved system information collection for Dell PowerConnect devices.
* Fixed issue when performing switch port lookup.
* Added support for CentOS 7.


Version 13.08


Rev. 20141024.1629

* Fixed SSL 3.0 vulnerability (CVE20143566).
* Fixed an issue when opening large terminal logs.

Rev.20141020.1157

* Fixed backup failures for certain Alaxala devices.
* Fixed issue with Terminal Proxy freezing when processing large output.
* Fixed backup failures for certain Dell PowerConnect switches.
* Fixed realtime change detection issue with certain Juniper Netscreen devices.
* Fixed issue where disabled system backup would automatically reenable
 after service restart.
* Fixed issue with SmartChange where empty replacement values could cause
 execution errors.
* Fixed configuration export failure for BigIP devices when the hostname is
 not populated.
* Fixed backup failures for various HP and Cisco device models.
* Fixed login failure in terminal proxy for Brocade devices.
* Fixed an incorrect OID definition in the NETLDMIB
* Fixed the display of newlines in the changelog
* Fixed issue with more than ten simultaneous SSH backups on windows
* Fixed permission issue with terminal proxy SSH connections
* Improved tool output column sorting to better handle mixed alphanumeric data.
* Fixed an issue where the username associated with a realtime backup
 would be incorrect.
* Fixed VTY password change tool failure for Cisco Security Appliance devices.
* Fixed Juniper ScreenOS password change tool to properly change the VTY
 Password instead of the Enable Password.
* Fixed an issue for some HP Procurve devices where backups would fail due
 to extra terminal control characters.
* Added support for disabling syslog port redirection on linux.
* Fixed an issue starting the server in Italian Windows.
* Removed CLIonly backup from Cisco Security Appliance adapter because
 such configurations cannot be restored.
* Fixed an issue for Cisco Nexus devices where backups might fail due to an
 unexpected response.
* Fixed backup failure for Fortinet Fortigate devices contains a space after
their hostname.
* Fixed backup failure due to timeout for Juniper ScreenOS devices with very
 large configurations.
* Fixed backup failure for HP Procurve devices that do not require password
 to login.
* Added support for Palo Alto Networks PA500 Firewall.
* Improved hardware information collection for Brocade NetIron devices.
* Fixed an issue where nonadministrator users could be shown a Cloud license
 expiration notice.
* Fixed login failure for some HP Procurve devices.
* Fixed backup failure for certain F5 BigIP devices running OS version 11.
* Fixed an issue where users restricted to certain networks could not see job
 history for those networks.

Rev.20131121.1801

* Improved hardware information collection of Brocade NetIron device.
* Fixed issue where the user who is not an administrator can see the notice of
 extinction of the Cloud license.
* Fixed issue where logging into new HP ProCurve would fail.
* Fixed issue where backing up F5 BIGIP device of OSv11 would fail.

Rev. 20131018.1903

* Fixed issue where the user who is limited to some network operations cannot
 see those operations history.

Rev. 20130904.1221

* Draft Configurations Feature:
  Support for creating configuration drafts from existing device configurations,
  or importing from text files.
  Draft configurations can be edited directly and can then be pushed to the
  device (either running or startup configuration).
  Drafts can also be compared to existing configurations to verify that only the
  parts you expect to change are affected.
* Change Advisor Feature:
  This is new feature that is unique in the industry. The Change Advisor can
  work with existing configurations or draft configurations.
* Tera Term Integration
  Working in concert with the Terminal Proxy
  feature, which allows automated login to devices and capture of terminal
  sessions, we have added the ability to simply rightclick on a device
  in the inventory list and open a Tera Term session that jumps directly into
  the device logging in automatically for you.
* ZeroTouch Feature: option
  We added the ability to create run after the ZeroTouch function, to back up
  add the inventory automatically.
* Add Supported Operating Systems
  Windows Server 2012
  Linux Cent OS / later than RedHat 5.x/6.x
* Improved user interface